Sign up Calendar Latest Topics Donate
 
 
 


Reply
  Author   Comment   Page 2 of 2      Prev   1   2
MarkL

Avatar / Picture

Sr. Member
Registered:
Posts: 1,098
Reply with quote  #16 
Thanks, Dave, so I need to source a cable from the microlog with its plug type(is that what you call Lemo?) with a BNC output on the other end?

this is the same unit but obviously, Monarch builds the unit for a lot of manufacturers? 
 Image result for monarch laser tach balancing


Hi Dave, would you happen to know where I can get the Datapac to BNC cable?


Walt Strong

Sr. Member
Registered:
Posts: 860
Reply with quote  #17 
I believe the multi-pin connector in the photo is a DIN and not Lemo (could be wrong). If you know the connector type and the pin-out connection, then you could make your own BNC cable. The DIN connector is a lot easer to solder than the Lemo, based on my experience with other instruments.

Walt
trapper

Member
Registered:
Posts: 66
Reply with quote  #18 
Quote:
Originally Posted by Vibe-Rater
Hi Sinsk, if you are buying one nowadays for 2140 it comes with a totally different attachment that swivels. Unfortunately I don't have one to show you but someone I'm sure will post here. rgds


DSC01844.JPG 

Attached to the 2140 using the "holes" for the carrying strap. The strap connects directly to the adapter.

DSC01845.JPG 

Swivels 360 degrees however I'm on my second cable in less than a year due to breaks where it connects to the 2140. I've thought of taking the cable off and only plugging it in when needed but when you're rushing around in the dirtier parts of the plant it's pretty inconvenient.



__________________

On Halloween the parents sent their kids out looking like me.
RRS_Dave

Sr. Member / Supporter
Registered:
Posts: 216
Reply with quote  #19 
The Enpac uses a 7 pin Fischer connector and the laser itself will use different ends of course, depending on what laser you have.
Sinski

Avatar / Picture

Sr. Member
Registered:
Posts: 393
Reply with quote  #20 
Quote:
Originally Posted by MarkL
Thanks, Dave, so I need to source a cable from the microlog with its plug type(is that what you call Lemo?) with a BNC output on the other end?

this is the same unit but obviously, Monarch builds the unit for a lot of manufacturers? 
 Image result for monarch laser tach balancing


Hi Dave, would you happen to know where I can get the Datapac to BNC cable?




We had the same unit as that at my previous company. We did use CSi there as well and were able to connect that up to both 2130 and 2120. I am sure you would be able to get a cable to connect to your analyser. There would have to be.
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.