Sign up Calendar Latest Topics Donate
 
 
 


Reply
  Author   Comment   Page 1 of 3      1   2   3   Next
OLi

Sr. Member
Registered:
Posts: 1,478
Reply with quote  #1 
If you search the Google Play for ME-Droid you can find and install a basic vibrometer with bearing condition for your device that we recently released, you need to buy the hardware, sensor from us. It is built from a accel, shear type..... and plug in to the USB. We have started to deliver them.
__________________
Good Vibrations since early 1950's, first patented vibrometer 1956 in the US.
http://www.vtab.se
Curran919

Avatar / Picture

Sr. Member / Supporter
Registered:
Posts: 452
Reply with quote  #2 
I see nothing on the play store, and the only thing I see at all on all of the internet (after quite a bit of searching), is this orphaned page on your site:

http://www.vtab.se/privacy-policy-of-me-droid/?lang=en

Nothing else...
OLi

Sr. Member
Registered:
Posts: 1,478
Reply with quote  #3 
Well, thank you! Software dept. (my sons) said ah well Sweden and Italy only it seems like... So it will shortly be adjusted and available worldwide.
Closest on the website is http://www.vtab.se/products/vibrometers/me22-droid-vibrometer/?lang=en
another sensor and number so it will be updated but that's my wife's dept....

__________________
Good Vibrations since early 1950's, first patented vibrometer 1956 in the US.
http://www.vtab.se
Curran919

Avatar / Picture

Sr. Member / Supporter
Registered:
Posts: 452
Reply with quote  #4 
Thanks, can you clarify the acronym "TOT"?
OLi

Sr. Member
Registered:
Posts: 1,478
Reply with quote  #5 

Total, unfiltered, not in German.... We had to fit it on a button, max 3 letters in the previous generation. 5+ years work for 2+ persons, 3rd version, auoch, but it will have peak-list and eventually FFT analysis etc. and the rule based analysis support. In another 5 years, auch again.

Do you think having a selection of ISO standards (or others) to select from for the yellow, red, green would be useful?
It is all digital already in the sensor so we can recalculate most things. We already have the FFT calculated, all parameters are calculated from that......


__________________
Good Vibrations since early 1950's, first patented vibrometer 1956 in the US.
http://www.vtab.se
Shurafa

Sr. Member / Supporter
Registered:
Posts: 310
Reply with quote  #6 
OLi

Is it OK to openly market our products here?

Regards- Ali M. Al-Shurafa
Walt Strong

Sr. Member
Registered:
Posts: 709
Reply with quote  #7 
I found the App here:

https://play.google.com/store/apps/details?id=vtab.meDroid

I am waiting for waveform and spectrum displays and storage/upload capabilities!

Walt
OLi

Sr. Member
Registered:
Posts: 1,478
Reply with quote  #8 
This is the market place AFAIK. I think the basic vibrometer level can be sold anywhere, when it get more advanced it may have some limitations in some places in some cases depending on your status on the NYSE and other things but that is normally like 2-plane balancing and such.
Walt, it's around the corner, any day now (or year) or even Real Soon Now :-). I have actually seen it but it was a previous iteration. I push the software dept. as hard as I can and that is on the other hand not so effective..... What format would you like to have the data in? Don't say CSI...... [rolleyes] It is not so complicated to log data either, memory and storage are more than enough, maybe have a sacrificial phone and hang it beside the machine and send data at a interval for those machines that misbehave behind your back. 

__________________
Good Vibrations since early 1950's, first patented vibrometer 1956 in the US.
http://www.vtab.se
OLi

Sr. Member
Registered:
Posts: 1,478
Reply with quote  #9 
Software dept. says CSV. Ok?
__________________
Good Vibrations since early 1950's, first patented vibrometer 1956 in the US.
http://www.vtab.se
OLi

Sr. Member
Registered:
Posts: 1,478
Reply with quote  #10 
You can also use this and other 3d party softw. in pc etc. http://www.sillanumsoft.org/download.htm
for full TWF, FFT, Cepstrum and other fun but you need to check calibration factor for the software.

__________________
Good Vibrations since early 1950's, first patented vibrometer 1956 in the US.
http://www.vtab.se
MarkL

Avatar / Picture

Sr. Member
Registered:
Posts: 902
Reply with quote  #11 
Interesting I’ve a few customers who would be good with a more advanced basic analyser. Does it display a fft or bearing condition rating only? Presume it’s a special accelerometer that connects by phones Micro usb?
OLi

Sr. Member
Registered:
Posts: 1,478
Reply with quote  #12 
Currently it is unfiltered TOT, ISO levels and 2 brg condition parameters, next upgrade is a peaklist of the 10 highest peaks, then a upgrade for FFT graphics but you can connect it to a PC and use the above free software for FFT etc. and even Cepstrum. Yes it connects to the phone USB with a suitable cable.
__________________
Good Vibrations since early 1950's, first patented vibrometer 1956 in the US.
http://www.vtab.se
vogel

Member
Registered:
Posts: 74
Reply with quote  #13 
It's a promising device Oli. Looking forward to seeing it in action, any videos/demo available?
Where can I buy the accelerometer and what is a ball park price for it? Is it propietary technology or could I plug other hardware?
Your development plans are great (although I would skip the 10 peaks list and go directly to fft analysis). Anyway, one limitation I see is that it will never have cross-channel phase, orbits or tacho (since the dsp is in the sensor), correct? That is why I am asking about hw interchangeability.
OLi

Sr. Member
Registered:
Posts: 1,478
Reply with quote  #14 
Well the A/D is a synch 2 ch system currently used to increase the dynamic range with one channel amplified more than the other so you can technically use it in different ways but for a simple vibrometer that was the easiest way to use it. Currently the app is connected to the sensor that is called ATU80 but the sensor is not locked and works fine with the software earlier mentioned as an example. We are selling them for USD 995:- and the app is in that way included to the current level with peak list upgrade. We do have the peak list working in a previous iteration so it should not be so far away I hope. We ship world wide and our older version of this kind of vibrometer w/o app are near to be mostly shipped to China for the reason that the bearing method is very easy to use and works anywhere. We do have a version of the 4-run balancing we call the 3-run method that my father developed in the 1950's that add a little roulette as you end up having the angle as a + or - relative the best test run so you potentially save a run or not. For that we can use that we have the full raw data out of the sensor and we already do hi resolution FFT so we can balance for the 1xRPM peak if you know the approx speed or we could tell you.
__________________
Good Vibrations since early 1950's, first patented vibrometer 1956 in the US.
http://www.vtab.se
John from PA

Sr. Member
Registered:
Posts: 803
Reply with quote  #15 
Quote:
Originally Posted by Curran919
Thanks, can you clarify the acronym "TOT"?


Quote:
Originally Posted by OLi

Total, unfiltered, not in German.... We had to fit it on a button, max 3 letters in the previous generation. 5+ years work for 2+ persons, 3rd version, auoch, but it will have peak-list and eventually FFT analysis etc. and the rule based analysis support. In another 5 years, auch again.



What happened to "overall"  = OA

Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.